Safety Information Sheet for Fire Barrier (FR101)
1.
INGREDIENTS
Proprietary Blend of Inorganic Salts and Water
2. PHYSICAL DATE
|
Appearance: Clear |
Vapor Pressure: N/A |
|
State: Liquid |
Melting point: N/A |
|
Odor characteristic: Mild |
Boiling point: As water |
|
pH: 6-7 |
Solubility in water: Complete |
|
Specific gravity (Water = 1): 1.12 |
Evaporation rate: As water |
|
Vapor Density (Air = 1): N/A |
Viscosity: As water |
3.
FIRE AND
EXPLOSIVE PROPERTIES:
Flashpoint: N/A
Auto-ignition temperature: N/A
Lower explosive limit (LEL): N/A
Upper explosive limit (UEL): N/A
4.
REACTIVITY
INFORMATION
Stability: Stable
Primary hazardous decomposition products: None
Hazardous polymerization: Will not occur
Incompatibility: None Known
5.
SPILL OR LEAK
HANDLING INFORMATION
Contain all spills and leaks to prevent discharge into the
environment. Soak up spilled material with a neutral absorbent
and transfer into waste containers for proper disposal.
6.
FIRE FIGHTING
INFORMATION:
Unusual hazardous: None
Extinguishing agents: N/A
7.
HEALTH EFFECTS
FROM OVEREXPOSURE:
Primary routes of exposure: Eyes
Inhalation: No problems should be experienced
Eye Contact: Mild eye irritation possible
Skin contact: No problems should be experienced
Ingestion: Mild irritation may occur
8.
FIRST -AIR
PROCEDURE
Inhalation: Move to fresh air
Eye contact: Flush with plenty of water
Skin contact: Flush with water
Ingestion: Give water or milk to drink
9.
RECOMMENDED
PERSONAL PROTECTION MEASURES:
Respiratory protection: None needed under normal
conditions
Eye protection: Chemical safety glasses are
recommended
Hand protection: None needed under normal
conditions
10.
STORAGE
AND HANDLING INFORMATION:
Storage conditions: Avoid freezing
Handling procedures: Standard chemical safety
Ventilation: General
** If irritation persists: Seek medical attention **
11. WASTE
DISPOSAL PROCEDURE:
|
Rating: |
Scale |
|
Health: |
1 |
|
Fire: |
0 |
|
Reactivity: |
0 |
|
Special: |
0 |
Scale: 0=Insignificant, 1=slight, 2=moderate, 3=high, 4=extreme
Personnel Protection Procedure: A
13.
REGULATORY INFORMATION:
(Not
meant to be all-exclusive selected regulations represented).
INGREDIENTS CONTAINED IN THIS MATERIAL WHICH REQUIRE REPORTING
UNDER THE PROVISIONS OF SARA TITLE III: None
14.
SUPPLEMENTAL INFORMATION:
The following information is provided to meet various state
regulatory requirements:
Water CAS
# 7732-18-5
Mono-ammonium Phosphate CAS #
7722-76-1
Ammonium
Sulfate CAS # 7783-20-2
Di-ammonium Phosphate
CAS # 7783-28-0
Surfactants Mixture
MSDS Date: 9/29/95
** If irritation persists: Seek medical attention **